AutoBrite Ceramic Shield Ultra Spray Wax

£19.95 ex VAT


SKU: AD/CSW500 Category: Tags: , , ,


AutoBrite’s Ceramic Shield Ultra Hybrid spray Wax, is easy to use and provides exceptional gloss and water behaviour.

Ceramic Shield Ultra Hybrid Wax is suitable for all paint types, exterior plastic trims, and exterior rubber surfaces. It provides a slick glossy feel, incredible water behaviour and a deep wet-look shine.

It’s easy to use formula allows you to achieve a ceramic like look and feel with the ease of application of a traditional spray wax.

Frequently asked questions..

What is Ultra Hybrid Wax

Ultra hybrid wax is the culmination of intensive research and development, combining the advantages of multiple different technologies present in some of our other products.  It contains the ceramic and wax properties of Ballad ceramic paste wax with some of the hard wearing temperature resistant properties of our Blendz wheel sealant all combined in an easy to use sprayable wax.

How long do I let it cure ?

Ultra Hybrid Wax does not require a curing time at the point of application.
There is a curing time of approx 1 hr between coats and 12 hrs before exposing to moisture.

What is the best way to maintain my vehicle after application ?

For regular maintenance of the vehicle after application of Ultra Hybrid Wax we recommend using Ceramic infused shampoo for your regular wash.

Can Ultra hybrid spray wax be applied over existing sealant products ?

Yes, Ultra hybrid spray wax can be applied over an existing layer of sealant to add extra gloss as with a traditional wax, while offering more durability and hydrophobicity.

Chemical Resistant Trigger included.

AutoBrite Ceramic Shield Ultra Spray Wax

AutoBrite Ceramic Shield Ultra Spray Wax

Prime a Ceramic Shield Microfibre Applicator with one spray of Ultra Spray Wax to moisten. On a clean, dry surface, apply one small mist directly to the surface, and spread in a criss-cross pattern over an area no larger than three feet square. Spread until product begins to haze and evaporate, and an even coverage is achieved (approx. 10-20 seconds). Use sparingly – less is more!
Buff off excess using a short pile microfibre towel using consistent pressure, turning the towel frequently.
Alternatively, for a quick and easy application over existing protection, apply one mist to a short pile microfibre towel, spread evenly in a criss-cross pattern, and buff off excess using a second towel.

Detailers tip

Our in house detailing team recommend two layers for the first application, then topping up after a maintenance wash with the two-towel method as and when it is required.
Two layers should provide 3-5 months protection and optimum gloss. Can be layered over MagiSeal for the ultimate in protection and gloss.
There is a curing time of approx 1 hr between coats and 12 hrs before exposing to moisture.

High impact panels may see reduced protection and require additional applications depending on mileage.


Important information

  • Do NOT apply Ultra hybrid spray wax to hot panels or in direct sunlight
  • Do NOT over apply product ! Less is more !
  • Do NOT store products in direct sunlight or in excessively cold temperatures
  • Do NOT apply this product to vehicle windscreens

Additional information