AutoBrite Final Finish Polish

£16.66 ex VAT


SKU: AD/FIN500 Category: Tags: , ,


Final Finish is a super fine Anti Hologram abrasive finishing polish, removing holograms, polishing haze, fine scratches, and marring.  Final Finish can remove up to 3000 grit sanding marks on all paint types (including scratch resistant coating systems).

This highly specialised product and can be used on all paint surfaces, offering a brilliant gloss finish every time!

The Autobrite Direct “Correct-it” range has been designed specifically for use on modern ceramic and scratch-resistant clear coats.  This range has also proven themselves to be ideal for use on harder (German) clear coats.

Easily identified colour coded pads and compounds make paint correction a piece of cake. Our black foam Correct-It pad is recommended .

Aimed at professional detailers and enthusiasts, these products offer significant advantages in terms of finish quality.

Each Product offers fully detailed, easy to understand instructions, cut and gloss scale –  thus ensuring the right product is used at the right stage of the paint enhancement or correction.

  • Cut 2/10 – Gloss 10/10
  • Perfect for removing holograms and fine swirls
  • Forgiving, easy to use diminishing formula with extended working time capabilities
  • Removes 3000 grit sanding marks
  • Quality high gloss & flawless finish.
  • Suitable for Rotary Polisher and DA
  • Silicone free


AutoBrite Final Finish Polish

Before Machine polishing your vehicle ensure that you have cleaned and decontaminated the paintwork thoroughly to ensure that the surface is completely free of contaminants that could potentially damage the vehicle paintwork or your machine polishing pad.

We recommend masking any delicate areas that could be damaged through contact with the machine polisher such as grilles, badges etc.
Once you have masked the vehicle and chosen your pad and compound combination you are ready to polish.

  • If you are using a new polishing pad we recommend applying a greater quantity of compound to “prime” the pad for use.
  • Working on a area of approx 15×15 inches, begin polishing at a low speed to spread the compound.
  • Gradually work up through the speeds until the desired machine speed is reached.
  • Work the compound until the haze begins to clear.
  • Once the compound has reached the clear stage it can then be removed with a soft pile buffing towel to reveal the correction status.
  • We recommend the use of IPA (Panel prep) to remove any residual polishing oils and reveal the true level of correction.

Additional information