Gladiator Textured Coating Kit

£69.95 ex VAT

Total:

SKU: N/A Category: Tags: , , ,

Description

Gladiator Textured Coating Kit is a 2K protective coating for a high quality finish with a characteristic orange peel effect.

The ideal solution for all prestigious semi-matt painting cycles, with a scratch-resistant and anti-abrasion coat. Designed as a waterproof high quality bed liner coat for loading bay of pick-up trucks, it is also widely used as a “tuning finish” on vehicles of all kinds whenever a refined aesthetic and scratch resistance are requested. It hardens extremely rapidly and has an excellent resistance to scratches and chemical agents. Complies with EC2004/42.

Each kit comes with 4 x 750ml bottles of textured coating and 1 x 1000ml hardener.

Application of Gladiator Black

Application of Gladiator Tintable

How to apply

FIRST COVER COAT

PRODUCT PREPARATION / STEP #1

BLACK • Pour 250 ml of CG1 Gladiator Hardener catalyst into the bottle of YA1 Gladiator Black.
TINTABLE • Pour 10% (75 cl about 80-100 g) of concentrated pigment paste into the bottle of YA2 Gladiator Tintable. Tightly close the bottle and shake well to get a uniform color. Add 250 ml of CG1 Gladiator Hardener catalyst into the bottle of previously colored Gladiator Tintable.

1ST COAT / STEP #2

BLACK & TINTABLE • Tightly close the bottle and shake it forcefully to uniformly mix the two products. Pour the quantity of catalyzed Gladiator Black or Tintable necessary for the first cover coat and dilute with 30-40% of D10 Universal Thinner.

APPLICATION

SPRAY GUN Gravity spray gun • SPRAY GUN NOZZLE 1.7 – 1.8 mm • AIR PRESSURE 2 atm (bar/PSI) • NUMBER OF COATS 1 coat + 1/2
Drying at 23°C / 10-15 minutes

SECOND DROP COAT

PRODUCT PREPARATION

BLACK & TINTABLE • Insert the tube of the Gladiator Spray Gun into the bottle of previously catalyzed but not diluted Gladiator Black or Tintable and screw the bottle onto the neck of the spray gun. Mixture pot life at 23°C 1h and 30’.

APPLICATION

SPRAY GUN Gravity spray gun • AIR PRESSURE 2.5 – 3.0 atm (bar/PSI) • NOZZLE CLOSURE 3-4 passes • SURFACE DISTANCE Approximately 40-50 cm
Drying at 23°C / 10-15 minutes

THIRD DROP COAT (optional)

Repeat phase 2

DRY TIME

FLASH OFF BETWEEN COATS 10-15 min

TACK FREE 30-40 min

THROUGH DRY 24-30 h

BAKING (OPTIONAL) 20 min at 60°C

Additional information

Finish

Acrylic 2K with texturized or orange-peel effect

Appearance

Semi-matt

Theoretical Yield

4 m2/l

Practical Yield

3 m2/l (May vary based on application thickness)

VOC

573 gr/l

Regulation

In compliance with EC 2004/42 : 2004/42/IIB(e)(840)600